Green Tractor Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
39 Posts
In the fit rite hydraulics section there is an install with a descent pdf to read through. Link. In there they show a slightly different tee (pic below). All you need to do in their setup is rotate the elbow fitting, put the tee on. Then reconnect the steel line for the SCV, and add your line to the valves you added. In the pdf they show a steel line running up to the new scvs and the tee is a oring face seal. If you want to use a hose you need to get an oring end on it. The ff6602.... is the part number that you can find online.

779052
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top