If I ordered a new tractor they definately would be on it. Jerking and tugging to get the 503 rotary cutter on gets old. when your tractors get old and scratched up another thing to make things handy is to drill a hole in the reinfored cutting edge of the bucket for a ball to spot trailers and hang things from.
The most used "option" that I purchased with my 4320
Telescoping draft links. If you're in the market for a tractor with a 3point hitch / lift, get these, if available, for your tractor. I believe mine cost approximately $200 installed plus the original links. They make your life so much easier when connecting or disconnecting your implements / equipment. :thumbup1gif:
They move out from the normal "locked in place' position approximately 5 inches to allow connection to the implement even though you didn't have the tractor exactly aligned with the implement.
Don't leave the dealer without them.:thumbsdown:
They move out from the normal "locked in place' position approximately 5 inches to allow connection to the implement even though you didn't have the tractor exactly aligned with the implement.
Don't leave the dealer without them.:thumbsdown:
Attachments
1 - 1 of 3 Posts
1 - 1 of 3 Posts
