If you want to look into forks you’re looking for the lifting capacity of your machine and the weight of the forks will decrease your load. Get ones that are a lightweight construction but tough enough to do the job. 2” receivers and stump buckets should be secondary to the primary function of the forks which is to lift heavy things. That said I have read good things about Artillian if you got the cabbage to shell out. As far as availability your dealer most likely carries Frontier forks which are basic but well built and lightweight.
I have the Frontier 42” AP10F and they weigh 200 pounds. They were 600 early last year. They have been good forks and I have no qualms except the frame around the fork notches has gotten a little dog eared from heavy loads swaying. Nothing structural and they’re still very functional.
I have the Frontier 42” AP10F and they weigh 200 pounds. They were 600 early last year. They have been good forks and I have no qualms except the frame around the fork notches has gotten a little dog eared from heavy loads swaying. Nothing structural and they’re still very functional.
