I'm making a left turn to the other half of the video, the OTC cab and storage. I have the one for the 2032R and it bolts to the upright ROPS. I MIGHT be able to get in the garage with the cab on but not with the ROPS up. I have height in the pole barn so I figured to put the pulleys there. I explored taking the cab off intact and spoke to the folks at OTC where they are always helpful. He suggested the screweyes on the top bolts for lifting so I put some on the last time I put the cab on. As I put the cab together I looked at what I would have to undo just to free the cab for lifting. Mounting points on the bottom of course. Then there are the attachments to the ROPS and behing the ROPS lights and the top in the back. Frankly, I decided it was almost as much work to take it off partly put together as just taking it apart. When I factor in my limited storage space I decided to just keep it as an annual kit. Never got around to putting it on this winter and didn't miss it as the winter was so mild compared to those a few years past.
I like the cab for winter use, but I also like the open seat for the rest of the year, especially when I use the BH.
I like the cab for winter use, but I also like the open seat for the rest of the year, especially when I use the BH.