Green Tractor Talk banner

unable to remove my 60d deck

3454 Views 20 Replies 12 Participants Last post by  chrsbabr
I'm trying to removed the auto connect mower deck from my 2020 1025r. I cannot release the left rocker lever (drivers side) to remove the deck. The right side is free and as expected. I'm on level ground, deck directly on ground, pto set to rear and followed the manual instructions, watched videos etc. This should be easy. What am I missing ? I'd appreciate the help

thank you
Garry
  • Like
Reactions: Jimmy Walker
1 - 2 of 2 Posts
Have you tried bumping the tractor a little forwards?
  • Like
Reactions: Jimmy Walker
The mower mounting mechanisms changed in mid-2020. Do you know whether you have the "up to 2020-1/2" or the "after 2020-1/2 lift mechanism? Most of us here obviously have the older setup and will be of limited assistance to you. A few have the newer setup. If you have the newer one, help might be a little slow coming as the pool of experienced users is still small.
  • Like
Reactions: Jimmy Walker
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top