Green Tractor Talk banner

1 - 5 of 5 Posts

·
Registered
Joined
·
223 Posts
Discussion Starter #1
Does anyone know what this two wire connector would be used for? It has a blue and black wire to it with a dummy plugq
 

·
Registered
Joined
·
375 Posts
I'm not positive but I believe that that is the wire that I plugged into for the switch on my independent lift.


Sent from my iPhone using Tapatalk
I agree. When I connected my independent lift switch, there was a wire harness that was connected to a two-wire plug under the dash that was capped with a dummy plug.
 

·
Registered
Joined
·
2,502 Posts
Which side of the dash? On the left side it would be the plug for the switch for the independent lift as stated above. If it is on the right side, it is to plug the wire harness to independent lift valve into.
 

·
Registered
Joined
·
223 Posts
Discussion Starter #5
Which side of the dash? On the left side it would be the plug for the switch for the independent lift as stated above. If it is on the right side, it is to plug the wire harness to independent lift valve into.
I only found the one plug it was in the center under the dash. Blue wire and black wire to the plug
 
1 - 5 of 5 Posts
Top