My four months have looked like this, looking back I have been waiting for about 2 1/2 months, I'm on week 11. My first quote was 12/17/2020 and the negotiation and attachment haggling began, so that is why it seems like 4 months. Then January 20th 2021 we agreed on price and terms and I signed my first purchase order and the waiting began.
Notice I stated, my first PO, as it has been stated many times before, the good folks on this site are more than happy helping you spend your money when it comes to tractoring. Since then I've had a very understanding salesman, "sure you can add that, I'll get you a price, and an updated PO to sign". I have added a couple of big ticket items and he was very fair with the pricing even with me on the hook already. So I took advantage of the 0% and headed towards my upper payment pain point. I did not reach that point so I feel really good about the purchase and what I am getting for my money. There were 3 additional POs signed and revised and signed again over the last two months.
My Purchase Journey
1/20/2021 PO #1
1025R and MSL w/ 53" bucket; 60" MMM w/ AutoConnect, Load-N-Go, and Much Kit; R4 Versa Turfs; AV10F Forks; JD 647 Tiller, 3rd function kit, AV20F Grapple; various odds and ends, wheel weights, Rim Guard, Suitcase weights, light guard and block heater.
I was planning on a heavy hitch 3 point weight rack for my rear ballast so I did not get the ballast box. Also in the meantime we got about 10" of drifting snow and I started shopping for snow removal options. This all while adding 2 orders for Ken's Bolt on Hooks, tie downs, 2 hooks and clevis mounts for the bucket, seat springs and dif lock pedal among other sundries from the local shops and stores.
2/19/2020 PO #2
Added the AF10F boom mount plow, the hydraulic angle kit, guides and deflector, and also added a ballast box as I had spent enough money outside the financing I could not justify the heavy hitch order that included the height rack, remember the sundries, they add up!
3/4/2021 PO #3
I added a Material Collection System. I went with the TVK20, thanks TTWT! Lots of trees and I currently have a powerflow system and a wagon for leaves, it works well enough but I was never very impressed with the plastic powerflow that hung kind of low on the deck, it's also on a tired GT235 so there's that too. I liked the PTO driven fan, the materials and construction, and the ease of use, at least from the videos I watched.
And then Finally
3/16/2021 PO#4
This one actually saved me money! My salesman called and said we have a problem with the snow blade. I should have know, lots of discussion about the 2025R MSL problems in the forums, and it does not fit the the MSL 120R loader. I saw some on the forum that modified the hooks and got them to work but I did not want to hack into a brand new attachment just to make it work so it was removed from the order and I ordered some Edge-Tamers to use while I look for a used blade or snow blower, probably which ever comes first.
In the same day my salesman ordered the TKV20, he sent me a picture of my bouncing baby tractor and stated the loader and mower were installed, the tiller and forks were here and we are just waiting on the grapple and MCS. Still need to install the 3rd function hydraulics and the power for the MCS when it gets here.
I talked to the salesman a couple days later and he sent me these and said it was going in for surgery and the 3rd service was being installed.
I knew that was a project as you have to take the tractor down to the frame, and why I was happy to give them $500 to install it. If they can do it in 5 hours more power to them, I do not have to mess with it.
The last I heard, talked to the salesman 4/1, the shop got it in Monday the 3/39 and it is starting to go back together. I was hoping to be able to pick everything up, sans the grapple, it is expected 4/22, and get to know it this weekend but I do not see that happening until next week some time.
Still Waiting....