Green Tractor Talk banner

2081 - 2087 of 2087 Posts

·
Premium Member
Joined
·
5,022 Posts
I am going to sneak into this thread for a moment. I am working on mounting this plow to the a-frame mount. I believe this is shared by both the two series and the three series. My question is on the four series or larger with a front three point do they run a cat 1 point up front or does it stay similar to this. I will probably add a couple pins so I can move it with the three point on back if I want but am curious if this would work on the front of a larger one then. Don’t need comments on the angle iron, just a test fit today for positioning.

FEBE7F66-7446-4295-AEB3-29FE691FEBCC.jpeg
 

·
Administrator
Joined
·
17,541 Posts
My question is on the four series or larger with a front three point do they run a cat 1 point up front or does it stay similar to this.
I believe its the same...
But on second thought does the 4's even have a front 3PH? There is no mid-PTO so no blower or broom would work, and the blade might be a little short.
 

·
Premium Member
Joined
·
8,441 Posts
Hooked up the rotary cutter and ground up some leaves and twigs in the woodlot.

731498


Time to let the ground soak up the sunshine and let the grass grow.
 

·
Registered
Joined
·
163 Posts
I believe its the same...
But on second thought does the 4's even have a front 3PH? There is no mid-PTO so no blower or broom would work, and the blade might be a little short.
4R’s have optional front PTO.



JD 110H, 140H3, & 318 w/ 23HP Vanguard
 
2081 - 2087 of 2087 Posts
Top