Question 1: During normal usage like light hauling on pallet forks or front loader, what RPM do you run at?
Question 2: Using a mid-mount mower like the 54" or 60", at what RPM do you engage the PTO?
Question 3: Once the mower deck is engaged, what RPM do you mow at?
Under normal usage, I start the 1025R at "idle" speed, the rev it up and run it at about 2500. Is that good or bad?
I mow with the mower deck elevated (the guys at the dealer said that is OK.) which gives me about a 5" cut. I engage the PTO at 2000 to 2500. (I don't like the sound it makes when I engage it at a lower RPM). Then, I mow at 2500 to 2700. Again, I don't know if that is good or bad? (the dealer said I should mow at about 3000).
I could use some advice. Thanks!
Question 2: Using a mid-mount mower like the 54" or 60", at what RPM do you engage the PTO?
Question 3: Once the mower deck is engaged, what RPM do you mow at?
Under normal usage, I start the 1025R at "idle" speed, the rev it up and run it at about 2500. Is that good or bad?
I mow with the mower deck elevated (the guys at the dealer said that is OK.) which gives me about a 5" cut. I engage the PTO at 2000 to 2500. (I don't like the sound it makes when I engage it at a lower RPM). Then, I mow at 2500 to 2700. Again, I don't know if that is good or bad? (the dealer said I should mow at about 3000).
I could use some advice. Thanks!
