Green Tractor Talk banner
3101 - 3120 of 3159 Posts

·
Chief Stick-picker-upper
Joined
·
15,725 Posts
Looks just like the towing point you use on the golf cart.
Now I understand. That one went right over my weak brain. :ROFLMAO:
Isn't Gray hair closer to Blonde, than Black? :LOL:
 

·
Registered
Joined
·
1,469 Posts
Not much but it’s the little details. I was given new outlet covers for my tractor bathroom but the giver was not aware I had a GFCI so this cover went into the shop.
It looks GREAT, but I think a shop needs bigger outlets...
794381
 

·
Premium Member
Joined
·
1,562 Posts
Installed my fender extension on the 4066R, only been collecting dus on the shelf for a couple years now. Lol .
Put the 3” wheel spacers on last night.
794584

794587

794585
794586
 

·
Premium Member
Joined
·
1,562 Posts
Also installed the power top link on one of the 5115Ms tonight . Made a mess, due to, having few fitting and hose leaks to deal with and ended up with a mismatch set of hoses and fittings, but got one of them on and working anyway . Going to change out that top hose soon as I track down some fittings and adapters to get a hose like the lower one on it.

794588


794589
 

·
Administrator
Joined
·
20,638 Posts
What ever happened to the OP @CADplans? According to the stats he was last online here May 2020.

I always like his posts and what he was doing around his place.
He hated the new software...so he was only posting over on TBN. Now that they have changed to the same basic format, I guess he bailed out of there too.
 

·
Administrator
Joined
·
21,541 Posts
The software change chased a lot of good members away. Not just from GTT, but all forums it seems.
 

·
Premium Member
Joined
·
8,311 Posts
I just messaged ilmo a couple days ago. They just had their 50th anniversary in June and he’s been busy so hasn’t been posting. He is planning to go to Farm progress though👍
 

·
Registered
Joined
·
362 Posts
I sharpened about 15 drill bits. Half were broken and the rest couldn't drill through butter 😄
This is the Drill Doctor 750X
794658
 

·
Registered
Joined
·
4,715 Posts
I've got one of them contraptions. My drill bits were sharper before I sharpened them.

Seriously, I just can't seem to get the hang of it. Guess I'm not smarter than a 5th grader. :ROFLMAO:
 

·
Registered
Joined
·
362 Posts
I've got one of them contraptions. My drill bits were sharper before I sharpened them.

Seriously, I just can't seem to get the hang of it. Guess I'm not smarter than a 5th grader. :ROFLMAO:
It is a learning curve. It took me a few times to get the hang of it, now I can get them fairly sharp.
 

·
Premium Member
Joined
·
5,458 Posts
794672
794673
794674
794675
794676
794677
794678
794679
794680
794681
 

·
Registered
Joined
·
325 Posts

·
Registered
Joined
·
325 Posts
Got around to doing a leak down check on my 1,460 hour Onan P218 in my 318, and only found leakage through the crank case breather. I was a little worried there was something going on with the valves, but they seemed solid. It leaks oil from behind the front PTO at a steady rate and puffs blue smoke under sudden load (sharp turn or engaging the mower deck for example). Both plugs also had oil on them. I have good intentions of working on it this winter. It seems like I can get away with a gasket kit and rings from this test today. This was some good news, and with some luck I’ll get it taken care of.


Sent from my iPhone using Tapatalk
 

·
Premium Member
Tator
Joined
·
16,199 Posts

·
Premium Member
Joined
·
4,097 Posts
I sharpened about 15 drill bits. Half were broken and the rest couldn't drill through butter 😄
This is the Drill Doctor 750X View attachment 794658
I have one of them too.
There was a time when I could sharpen anything bigger that 1/4" freehand on a bench grinder. That skill leaves quick when not exercised regularly.
 
3101 - 3120 of 3159 Posts
Top