Green Tractor Talk banner

1821 - 1831 of 1831 Posts

·
Premium Member
Joined
·
4,334 Posts
Still raining or snowing each day so too muddy to be out.

Put lights on the corn picker and then a trailer connector on the gator. Been going to do the corn picker for two years and the gator for at least five. Should have put this is an accomplishment in the procrastination thread.
 

Attachments

·
Registered
Joined
·
132 Posts
Weather was very nice today for December and I had just received my Cyber Monday order from GFP. I fixed the broken parking brake spring on the Gator so it works as it should now. Also installed the new umbrella shade on the 2025R. Thanks to GFP for the extra discount and fast shipping!
 

·
Premium Member
Joined
·
13,770 Posts
Seems I forgot to post a few photos of the door I made. Yes , door knob is higher height than normal, but works out fine , since this door is at the bottom of basement steps..

No stain or clear coat on door at present time.

IMG_20191211_091248329.jpg IMG_20191211_091232500.jpg



Then been working on a truck, this one is totally different from the ones I have made. Hope to finish it today or tomorrow.. given it to our new minister this Saturday
IMG_20191211_132220440.jpg
 

·
Premium Member
Joined
·
4,334 Posts

·
Premium Member
Joined
·
13,770 Posts

·
Premium Member
Joined
·
13,770 Posts
Getting closer to being finished.


IMG_20191211_162611556.jpg
 

·
Premium Member
Joined
·
13,770 Posts
Put the finish coat on , and ready to call it quits..
Instead of open cab, put sides on the cab. Put the headlights fenders, and put a band around the side of the bed. Makes it hard to see the rear wheels, and yes they are dual.
 

Attachments

·
Registered
Joined
·
4,159 Posts
We've been working in the old shop. Anybody able to guess what this is?
720909
 

·
Administrator
Joined
·
20,162 Posts
Looks like you're welding on an old tube boiler.
 

·
Registered
Joined
·
4,159 Posts
Dirty was welding the tubes in the heat exchanger for the new wood heater. The tubes are inside a 55 gallon barrel. The half round parts are areas he hadn't welded yet. Stuck the camera right in the hole.
 
1821 - 1831 of 1831 Posts
Top