Green Tractor Talk banner
1 - 8 of 8 Posts

·
Registered
Joined
·
2,356 Posts
I believe Kenny meant 5 holes on 4.5" bolt circle. So,4.5" would be 114.3mm. Bob
 
  • Like
Reactions: KennyP

·
Registered
Joined
·
2,356 Posts
Paul, Curious now... or you could say nosey! In MTF you inquired about 430 parts, and here 318 parts. What are you working on... or both? Bob
 

·
Registered
Joined
·
695 Posts
Exact conversion is 1" = 25.4mm = 2.54 cm

For 'estimating' 25 mm per inch, or 2 1/2 cm per inch.

For small measurements
1mm = 0.03937" (1/25.4 would be exact, and there are a bunch more decimal places)

Guesstimating/Estimating around the shop -- 1mm approx 0.040 (40 thou)
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top