[akadave]

I'm curious which loader function guys are using with a diverter for a grapple and the thought process behind that choice.

For example, if it's set on the lift/lower function do you have the open on the lift side or the lower side? Same question with the curl. Seems no matter how I set it up I'm having to move the joystick to the opposite side to get the function I need. If I release or engage the switch too soon I get bucket movement that isn't helpful. I've had this setup for about three years but don't use it that often so maybe I'm just not getting the feel for it yet.

I mainly use it for brush and other light stuff.

 

[akadave]

are you using a diverter or a separate third function value. I had a Artillian setup on my 2016 1025R that the grapple ran off the dump/curl function. You could either do the dump/curl or open/close functions at the touch of the switch, but not both at once. on my 2038R I went with the WRLong third function and have both actions active at once. If you can go with the third function I would recommend it.

I have a diverter set up like Ken recommended above. I also have a third scv but don't use it for the grapple. I think having to switch controllers would be worse. I think I just don't have the muscle memory due to infrequent use. It does the job just not fluently.