Green Tractor Talk banner

Which SCV for Grapple Diverter

897 Views 7 Replies 6 Participants Last post by  BOBL
I'm curious which loader function guys are using with a diverter for a grapple and the thought process behind that choice.

For example, if it's set on the lift/lower function do you have the open on the lift side or the lower side? Same question with the curl. Seems no matter how I set it up I'm having to move the joystick to the opposite side to get the function I need. If I release or engage the switch too soon I get bucket movement that isn't helpful. I've had this setup for about three years but don't use it that often so maybe I'm just not getting the feel for it yet.

I mainly use it for brush and other light stuff.
1 - 1 of 1 Posts
AKA Dave,

A diverter and 3rd SCV are not the same thing. Buy the JD 3rd SCV and you'll be happy forever. It provides a seperate function control for the cylinders that open and close the grapple, or side to side for plows, etc. You receive a new joystick top and the 3rd SCV is controlled by your thumb.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top