Green Tractor Talk banner

Wiring for Additional Key for Ignition

1212 Views 21 Replies 10 Participants Last post by  Herminator
We're wanting to add several methods to protect our 5075E (2014ish). We'll have lots and lots of other methods in place, but, does anyone know the specific wiring on the key ignition that we could add another switch to? On older cars, there are several options including power to the ignition/coil/etc... as well as the one to the starter solenoid, etc...

Any ideas, or where I can find the wiring diagram?
1 - 1 of 1 Posts
If I can get to the two terminals on the back side of that switch, I can drive off with your tractor in a minute or two.


Most thieves will not go that far though. They want fast and easy.

I would consider interrupting the PTO safety circuit in some obscure way. All you would need is a simple SPST switch in some hidden place.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.