Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
223 Posts
Discussion Starter #1
would a 59" blower fit an x738? found one for the money it is on a 855 deere now
MO2756X190432 is serial number and 59'-42/43/4400
thanks
 

·
Premium Member
Joined
·
12,131 Posts
As you know, the 59-inch blower is a beast! It was never made to fit an X-series tractor but anything can be made to fit with a bit of fabrication. The big concern is the 59-inch blower weighs 450 lb. compared to the 54-inch which is only 250 lb. That is probably a bit too much weight for the front axle.
 

·
Premium Member
Joined
·
1,776 Posts
As you know, the 59-inch blower is a beast! It was never made to fit an X-series tractor but anything can be made to fit with a bit of fabrication. The big concern is the 59-inch blower weighs 450 lb. compared to the 54-inch which is only 250 lb. That is probably a bit too much weight for the front axle.
I can just see it now 59inch stuck In snow Bank and X738 Just spinning the tires Back and Forth in Place :laugh:

cin769 have You checked with this Place John Deere Dealership Roeder Outdoor Power to see if they have a used 47 or 54inch in stock :bigthumb:
 
1 - 4 of 4 Posts
Top