Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
253 Posts
You have to run a lne from the transmission to the diverter valve and then to the fel. The steel lines are just for the bucket.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
There are three black steel lines coming to loader valve from rear of tractor. I think the instructions say to use the middle. A photo of someone's installation going to transmission would be helpful. Thanks
 

·
Registered
Joined
·
253 Posts
I had mine installed when I purchased the tractor and had a 4n1 bucket put on. I'm not able to crawl underneath to get a picture for you. Hopefully someone else can get a picture for you.
 

·
Registered
Joined
·
1,303 Posts
Here is my WR Long third function valve on a 3025E. The rubber line is the one that goes to the valve and then there is another line that goes to the transmission and connects in to part right next to a black steel hydraulic line. The aluminum block is the valve and you will see a line that comes out of the bottom of it, that is what goes to the transmission. Hope this helps. :greentractorride:
 

Attachments

1 - 7 of 7 Posts
Top