Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter #1
hello new to the forum but would like to hear some ideas on what could cause it not to start here is what i have checked so far
i could jump across Solenoid tractor would start so i replaced it with a new one now the tractor still wont start the relay just clicks
i can jump from power from battery to purple wire on solenoid tractor will start took my meter and check the key switch it is good can anyone help please getting ready to trade it in on my new 2038r
if i can get this thing to start lol
 

·
Registered
Joined
·
3,228 Posts
hello new to the forum but would like to hear some ideas on what could cause it not to start here is what i have checked so far
i could jump across Solenoid tractor would start so i replaced it with a new one now the tractor still wont start the relay just clicks
i can jump from power from battery to purple wire on solenoid tractor will start took my meter and check the key switch it is good can anyone help please getting ready to trade it in on my new 2038r
if i can get this thing to start lol
Try removing the small wire from the solenoid. Then use a jumper wire between the battery positive post and the terminal. The system will crank if it's able to.
Also check if you have power to the small wire when you turn the key to start. If not a safety system is probably acting up.

I would just have the dealer pick it up (as your trade in) when they drop off your new one. lol lol
Then it's there problem. Isn't that the reason most people trad things in? To make it someone else's problem. lol
 

·
Registered
Joined
·
86 Posts
Discussion Starter #3
Try removing the small wire from the solenoid. Then use a jumper wire between the battery positive post and the terminal. The system will crank if it's able to.
Also check if you have power to the small wire when you turn the key to start. If not a safety system is probably acting up.

I would just have the dealer pick it up (as your trade in) when they drop off your new one. lol lol
Then it's there problem. Isn't that the reason most people trad things in? To make it someone else's problem. lol
thanks for the info it will start taking power to the small wire and i would like to make it there problem
 

·
Registered
Joined
·
86 Posts
Discussion Starter #4
Try removing the small wire from the solenoid. Then use a jumper wire between the battery positive post and the terminal. The system will crank if it's able to.
Also check if you have power to the small wire when you turn the key to start. If not a safety system is probably acting up.

I would just have the dealer pick it up (as your trade in) when they drop off your new one. lol lol
Then it's there problem. Isn't that the reason most people trad things in? To make it someone else's problem. lol
it will crank if i i jump from power to small post
 

·
Registered
Joined
·
86 Posts
Discussion Starter #5
found it

found the problem today when i got up. I feel so damn stupid not even funny blown fuse was the issue i found check them when this problem started but when i read it with my meter it read replaced all fuses tractor will start now


thanks for everyones help and advice
 

·
Registered
Joined
·
3,228 Posts
found the problem today when i got up. I feel so damn stupid not even funny blown fuse was the issue i found check them when this problem started but when i read it with my meter it read replaced all fuses tractor will start now


thanks for everyones help and advice
Oviously the small wire didn't have power when the key was turned to start/crank.

That's the easiest test to run when you have a no crank issue. It works on a lot of different equipment, cars and trucks. Just have to be careful because you are bypassing all the safety systems. If you have a manual transmission in gear away it will go. lol
 

·
Registered
Joined
·
86 Posts
Discussion Starter #7
Oviously the small wire didn't have power when the key was turned to start/crank.

That's the easiest test to run when you have a no crank issue. It works on a lot of different equipment, cars and trucks. Just have to be careful because you are bypassing all the safety systems. If you have a manual transmission in gear away it will go. lol
That wouldn’t be good


Sent from my iPhone using Tapatalk
 
1 - 7 of 7 Posts
Top