Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Well, I bought my first John Deere yesterday from my brother in law-a 2006 X320. He isn't the sharpest pencil in the pack and he left the key on for a few weeks so the hour meter now reads 998.8 hours on it. Is there any way I can turn the meter back to about 50, which the mower has. It has sat in a shed for 4 years and not even run at all. Thanks in advance!! Rick
 

·
Registered
Joined
·
653 Posts
Just do what your brother in law did. Leave the key on till the hour meter flips around back to about 50 hour mark.
Just a shot in the dark some body on the forum may have a better idea.

Doug
 

·
Administrator
Joined
·
17,506 Posts
:wgtt:


You can't turn them back, but you can buy a new one and run it up to 50 hours by powering it.
 

·
Administrator
Joined
·
20,466 Posts
Welcome to GTT!



A new hour meter is cheap. Kenny's advice is spot on. I would power it up not installed on the tractor cause I don't know what else would be on. A battery charger and some wire will accomplish this task easily.:good2:
 
1 - 4 of 4 Posts
Top