Green Tractor Talk banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Anyone here have an X590 with a 42 hydraulic tiller? I am having problems with getting the pin through the left side of the frame where the hook goes over the frame mounting bolt. The right side I can get the pin in fine, but whwn I move to the left side, I can not get the pin in the hole because the diff lock linkage is in the way. The part of the linkage that has the dog leg in it is right behind yhe hole the pin needs to go through and I can not no matter how I try get it in.

I'm hoping someone with an x590 and 42 inch tiller attachment can advise me on what to do.

Sent from my SM-N920V using Tapatalk
 

·
Premium Member
Joined
·
1,657 Posts
Anyone here have an X590 with a 42 hydraulic tiller? I am having problems with getting the pin through the left side of the frame where the hook goes over the frame mounting bolt. The right side I can get the pin in fine, but whwn I move to the left side, I can not get the pin in the hole because the diff lock linkage is in the way. The part of the linkage that has the dog leg in it is right behind yhe hole the pin needs to go through and I can not no matter how I try get it in.

I'm hoping someone with an x590 and 42 inch tiller attachment can advise me on what to do.

Sent from my SM-N920V using Tapatalk
You May want to Talk to this Member over at MTF MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information - View Profile: Alberta Al He also Has a You tube video On Installing the Hydraulic tiller https://www.youtube.com/watch?v=8RFpd0yJOgM It hooks Up the same way between all X500 series Tractors X500 thru X590:bigthumb:
 
1 - 2 of 2 Posts
Top