Green Tractor Talk banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,556 Posts
Pretty normal for the first half of the throttle lever to not increase rpm at all. Unless you aren't getting till rpm at WOT there is no need to adjust the cable.

If need be there is a adjuster at the end of the cable.
 

·
Registered
Joined
·
1,556 Posts
I gave it full throttle with the lever then pushed the throttle under the hood the rest of the way. I’d say it increased a couple hundred RPM’s. I’ve always thought full lever throttle sounded a touch low, not that I could tell the RPM, but I was surprised it didn’t sound faster. Pushing the throttle the rest of the way by hand sounded “right”.
Turn the key on and press the RIO button 8 times rapidly then start the engine. That should bring up a digital tach on the dash. WOT throttle is 3600 no load. Cable should be adjusted for that.
 

·
Registered
Joined
·
1,556 Posts

This trick is only for the x7s with the digital dash display.

The RIO button is the orange button on the left side of the steering column.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top