Green Tractor Talk banner

1 - 9 of 9 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
I have a z540m with a 54” deck I am having a deck/blade level issue. With the outside blades measuring 3“, front to back, from tip to ground, the middle blade measures 2 5/8. I see the effects in my yard. I’ve checked everything I know to check, and, installed new blades. Am I missing something? Thanks for you help in advance. Garry
 

·
Senior GTT Super Slacker
Joined
·
37,834 Posts
That's a new one on me.
Is this a NEW machine?
 

·
Registered
Joined
·
108 Posts
My Z540R with 48" deck was horribly out of adjustment when delivered. I didn't check it first, and mowed set at 2.75". It looked like it wasn't cutting, because it wasn't.
Set at 2.75, it was cutting at 3.5" and it was out of adjustment side to side and front to rear.

I adjusted it myself per the specs. in the manual.

I emailed the salesman to complain, no response. Never did get a hat either.
 

·
Registered
Joined
·
25 Posts
I have a z540m with a 54” deck I am having a deck/blade level issue. With the outside blades measuring 3“, front to back, from tip to ground, the middle blade measures 2 5/8. I see the effects in my yard. I’ve checked everything I know to check, and, installed new blades. Am I missing something? Thanks for you help in advance. Garry
Could the middle blade be on upside down?
 
1 - 9 of 9 Posts
Top