Get ready for lawn overseeding and be prepared for annual aeration. Improve fertilizer intake, reduce water runoff and relieve soil compaction!
I have a Lesco LA6000 Lawn Aerator for sale. This was manufactured by Classen for Lesco. A John Deere version was also available. This aerator is identical to the Classen 60-RT. The aerator can be used as a drawbar pull-behind or 3 Point Hitch operated implement. The Classen 60-RT manual is attached with more information. It has a 52" width for 60" coverage with each pass.
The aerator is very well built and I'd estimate weighs nearly 350#. It can also be loaded to 780# with additional weight to help pull plugs from highly compacted soil. It has two independent, staggered tine gangs with ten reels and uses 60 tines. I'm also including an additional 30 spare tines with the unit.
(Series 60RT, number represents tine quantity)
Heavy-duty core aerator built with 1-1/2" x 1-1/2" solid square steel stock with weight tray for optional added weight.
Tow-Behind Lift Aerator Features:
- Independent tine shafts for greater turning ease
- 1" sealed ball bearings for low maintenance
- Tines are heat treated and hardened all the way through with ¾” diameter for aerating depths to 4-inches deep
- Available with manual or electric lift
- Staggered Hole pattern 5.25" x 7"
- 15 hp minimum tractor required
I acquired the aerator used a few years back and replaced a bent gang, some tines and all the gang bearings. Other than that it's been used a couple of times a year on my property.
It could use some paint and polish but it's all there. Classen currently sells the 60-RT for ~$2,500. I'd like to get $1,000 for this Lesco LA6000.
![]()
![]()
![]()
![]()
![]()
![]()
I have a Lesco LA6000 Lawn Aerator for sale. This was manufactured by Classen for Lesco. A John Deere version was also available. This aerator is identical to the Classen 60-RT. The aerator can be used as a drawbar pull-behind or 3 Point Hitch operated implement. The Classen 60-RT manual is attached with more information. It has a 52" width for 60" coverage with each pass.
The aerator is very well built and I'd estimate weighs nearly 350#. It can also be loaded to 780# with additional weight to help pull plugs from highly compacted soil. It has two independent, staggered tine gangs with ten reels and uses 60 tines. I'm also including an additional 30 spare tines with the unit.
(Series 60RT, number represents tine quantity)
Heavy-duty core aerator built with 1-1/2" x 1-1/2" solid square steel stock with weight tray for optional added weight.
Tow-Behind Lift Aerator Features:
- Independent tine shafts for greater turning ease
- 1" sealed ball bearings for low maintenance
- Tines are heat treated and hardened all the way through with ¾” diameter for aerating depths to 4-inches deep
- Available with manual or electric lift
- Staggered Hole pattern 5.25" x 7"
- 15 hp minimum tractor required
I acquired the aerator used a few years back and replaced a bent gang, some tines and all the gang bearings. Other than that it's been used a couple of times a year on my property.
It could use some paint and polish but it's all there. Classen currently sells the 60-RT for ~$2,500. I'd like to get $1,000 for this Lesco LA6000.
