Green Tractor Talk banner

Shindaiwa T20 String Trimmer

869 views 1 reply 2 participants last post by  flyweight  
#1 ·
I have Shindaiwa string trimmer with no spark. Installed new plug, still no spark. This model has electronic ignition accord to label. When rope is pulled to start, most always the there is no spark at plug. I saw blue spark when starting just a few times. With electronic ignition, other then then the coil, is there other parts to fail?
Thanks, Bob
 
#2 ·
Check the condition of the flywheel magnet and ignition coil. If rusted, remove the coil and clean both areas. Reinstall and set Air Gap to 0.25.
If still no spark, replace electronic ignition module. Part number, 20035-71710.