Welcome to GTT

 

Welcome from Preston County, West Virginia

 

Which light? On the dash or the actual hazard lights on the ROPS?

 

 

number 6 is the one on this dash

 

That doesn't look like a 1025r dash - I didn't think any of them had a fuel gauge in the cluster.

In any event on the 1025r I believe it uses the exclamation point indicator (in the LCD display?) when you are doing something it doesn't like safety wise - trying to start in gear etc. backing up with deck engaged, getting off seat with machine in gear, etc.

Here is the 1025r manual: OMLVU25849

The cluster you are showing appears to be from a 2036r - OMLVU31190 a much bigger and different machine.
Note that the manual identifies that icon as "H - Service Alert Indicator Icon - Light flashes indicating performance or operational problem is detected that needs to be resolved as soon as possible."

Here is the link to that manual - OMLVU31190

I'd imagine the computer tests all the indicators on startup but not sure how long that should be . . . maybe someone else can be of more help.

 

that isn't the dash but it has the caution symbol I have and it's in the same spot

 

this looks more like my 2018 1025r dashboard

 

I've never seen this but mine is a 2015 🤷‍♂️

 

Huh. That's an odd one. I have a 2017 and that's not in my instrument cluster either. I'm assuming it's just a warning light that just comes on with the rest of the lights when you first turn key on.

 

Huh. That's an odd one. I have a 2017 and that's not in my instrument cluster either. I'm assuming it's just a warning light that just comes on with the rest of the lights when you first turn the key on.

it comes on with the whole cluster. and goes out with the whole cluster when it starts and then it comes back on by itself a couple of seconds after it starts and blinks about 4 or 5 times and goes out and I don't ever shift it or do anything with it yet. then I use it and nothing sounds or feels any different is there a 100 hours service? it has 90 hours on it now maybe it's telling me there is a service coming up?

 

Mine came on once, I started it up and let it run like 30 seconds or so in the pole barn. Think it wasn't get clean oxygen, pulled it out never ever seem it again on.

 

I have that same light on my '20 1025R. It lit once briefly and I haven't hit 10 hrs yet.

 

Next time it comes on, check the LCD near the bottom of the tach. From what I've read, it can either give you an error code or tell you what's wrong in plain text.

 

my 2018 owners manual omlvu31626 shows that light as service alert indicator icon-This light flashes, indicating that performance or operational problem is detected that needs to be resolved as soon as possible.
Doesnt tell you much

 

thanks I read that too I'm checking to see if anyone else had the problem too and what their problems were.

 

Yeah my 2020 1025R manual says the same thing. But I've read about instances of people having that light illuminate and also receiving a code or a message on the display.

Edit: Like this 1025r Error 14?

 

Is it a blink code? Perhaps call your dealer and talk to service.

 

Possibly throwing a code. Sensor or something not reading properly. Call dealer

 

So do you see a code or message in the display when it happens?

 

2016JD3038e light on far left beside temp light is .Has two arrows in a circle. Thanks

 

This thread is about a completely different machine, please start a new thread in the LCUT forum with details on your issue.

 

I have a 4066R tractor that has that exclamation point light that comes on flashing after about 3 to 4 seconds after starting. The lcd display reads ICC A 3352.07, any ideas?

 

Hello and welcome to GTT! This thread is really not relevant to your machine, you should start a new thread of your own and give as much info as possible. Such as what you were doing when the light came on, previous service history of your machine, how many hours etc.

Also, if you download the TractorPlus app you can look up fault codes right in the app. Give that a try as well