Green Tractor Talk banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
10,275 Posts
Pretty poor on JD's part saying those are one position wheels.
They are 8 position wheels. All positions may not fit your tractor.
Center can be dish in or dish out (2 positions)
Wheel/rim can be mounted inside the center or outside the center (2 positions)
Wheel/rim can have valve stem inboard or out board. (2 positions)
2 x2 x2 = 8 positions
A better manual would tell the tread width for each position and tell which, if any positions, were not usable.
 

· Premium Member
Joined
·
10,275 Posts
How much did you gain? The only way to get wider yet is put the wheels valve stem in.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top